Posted by We spent many hours on research to finding gas dryer hose 3/8, reading product features, product specifications for this guide. For those of you who wish to the best gas dryer hose 3/8, you should not miss this article. gas dryer hose 3/8 coming in a variety of types but also different price range. The following is the top 10 gas dryer hose 3/8 by our suggestions:
Reviews
1. BrassCraft CSSD114R-72 X Safety PLUS Gas 1/2" OD Connector with 3/8" Female Flare EFV x 1/2" MIP x 72"
Feature
3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coatingSafety+PLUS Excess Flow Valve helps protect against gas fires and explosions - 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
Approved for indoor and outdoor use. 100% Leak Tested
Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft's 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU's. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft's stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.2. LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings
Feature
Indoor or outdoor useYellow Safety Coated
Corrugated Stainless Steel
For Use with Natural Gas or Propane
To Connect Gas Dryers
Description
LASCO 10-1215 LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings. For indoor or outdoor use. Yellow safty coating - corrugated stainless steel. For use with natural gas or propane. Connect to gas dryers! Larsen Supply a third generation family owned and operated company with over 80 years of experience has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU's. We pride ourselves on service, selection and support! All Lasco merchandise if warranted to be free of manufacturing defects. Please revert to retail place of purchase for resolution of any possible plumbing questions, warranty or defective part replacement.3. Flextron FTGC-YC38-72E 72 Inch Flexible Epoxy Coated Gas Dryer Connector with 1/2 Inch Outer Diameter & 1/2 Inch FIP x 3/8 Inch FIP Fitting, Yellow/Stainless Steel, Excellent Corrosion Resistance
Feature
Dryer and Water Heater Connector with 1/2" Outer Diameter; Yellow/Stainless Steel72" Long with 1/2" FIP x 3/8" FIP Fittings; Gas Connector is 100% Leak Tested
Rated Pressure: CSA Certified up to 0.5 psi; Rated Operating Temperature: -40Fahrenhiet to 150Fahrenhiet
FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304
Suitable for Indoor and Outdoor Stationary Gas Appliances; CSA Approved and Certified
Description
Flextron 72 Inch Flexible Gas Line Connector features 1/2 Inch Outer Diameter & 3/8 Inch Inner diameter with 1/2 Inch Female Iron Pipe (FIP) x 3/8 Inch Female Iron Pipe (FIP) Fittings. This gas connector is from YC38 series of connectors and is made of uncoated stainless steel. Designed for indoor and outdoor use with Dryer and Water Heater Connectors. It Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. The coating is applied only after the connector has been 100% leak tested to provide a complete corrosion resistance. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit.
Specifications:
4. 72" Flexible Stainless Steel Gas Appliance Line with 1/2" OD 1/2 MIP x 1/2 FIP
Feature
Genuine OEM72" Flexible Stainless Steel Gas Appliance Line
203-3132-72
Description
72" Flexible Stainless Steel Gas Appliance Line With 1/2" OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2" OD (3/8" ID) 1/2 MIP x 1/2 FIP - Yellow Coated.5. Mr. Heater One-Stop Universal Gas-Appliance Hook-Up Kit
Feature
5-piece universal gas-appliance hook-up kitComes with everything needed for installing most gas appliances
Includes 18-inch flexible gas line, 3 different couplings and on/off valve
On/off valve provides easy servicing of appliances or summer shutdown
Solid brass fittings
Description
Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters. Size: 3/8 inch, Compatible With: Heaters, logs, ranges, dryers, etc., Product Type: Connection kits, Fuel Type: Propane/natural gas6. BrassCraft CSSL45R-72 P Safety PLUS Gas Appliance Connector with 3/8" OD EFV and 1/2" MIP x 1/2" FIP x 72"
Feature
1/4 In. ID (3/8 In. OD) x 72 In. corrugated stainless steel connector with corrosion resistant coatingSafety+PLUS Excess Flow Valve helps protect against gas fires and explosions - 1/2 In. MIP connection to gas supply or gas ball valve
Approved for indoor and outdoor use. 100% Leak Tested
Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft's 1/2 In. MIP (3/8 In. FIP) EFV x 1/2 In. FIP x 72 In. Safety+PLUS Gas Appliance Connector is 3/8 In. OD (1/4 In. ID) with a maximum operating capacity of 23,100 BTU's. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft's stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.7. Flextron FTGC-YC38-72 70" Flexible Epoxy Coated Gas Line Connector with 1/2" Outer Diameter and Nut Fittings, Yellow/Stainless Steel
Feature
Flextron part number FTGC-YC38-72Gas dryer and water heater connector
Stainless steel with yellow epoxy coating
70" long with 1/2" outer diameter
Nut fittings on both ends
Description
This is a Flextron gas connector from their Yc38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. It has an outer diameter of 1/2" and an inner diameter of 3/8" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. On the ends of this 70" long connecter are nut fittings. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0.5 psi. Please consult the product information for the flow capacity for this part, for natural gas. The part meets the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f.8. BrassCraft CSSC54-72 P 1/2-Inch FIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 86,000 BTU
Feature
5/8 In. OD with 15/16-16 Thread x 72 In. stainless steel connector w/corrosion resistant coating1/2 In. FIP and 1/2 In. MIP steel gas fittings
86,000 BTU max flow capacity. Use with natural or LP (propane) gas
Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Brass Craft's 1/2 In. FIP x 1/2 In. MIP x 72 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU's. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.9. Stanbroil Universal One Stop Gas Appliance Hook Up Kit - Brass Gas Ball Valve and Flexible Gas Connector w/Fittings
Feature
Highly durable, easy to install and use for most gas appliances1/2" OD x 3/8" ID, 22" stainless steel flexible gas connector with 1/2" Female Flare on both end
Brass Shut-off valve 1/2 female NPT x 1/2 Male Flare
3 different couplings,1/2" male Flare x 1/2" NPT, 1/2" male flare x 3/8" male NPT, 1/2" male flare x 3/8" female NPT
CSA certified
Description
Along with everything needed for installing most gas appliancesOn/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 21.5" stainless flexible gas connector
1/2"female flare at both ends
1/2" male Flare x 1/2" NPT
1/2" male flare x 3/8" male NPT
1/2" male flare x 3/8" female NPT
Brass shut-off valve with 1/2" female NPT x 1/2" male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters
10. BrassCraft PSC1106 K5 Safety PLUS Gas Installation Kit for Dryer and Range
Feature
Fits all current and most older dryers and rangesSafety+plus excess flow valve helps protect against gas fires and explosions - 1/2 in. Mip connection to gas supply or gas ball valve
Approved for indoor and outdoor use. 100% leak tested
Use with natural, manufactured, mixed and liquefied petroleum (lp or propane) gases and lp gas-air mixtures
Csa certified. Designed, machined & assembled in the USA