LAUNCH CRP123 OBD2 Scanner ABS SRS Transmission and Engine Code Reader Diagnostic Scan Tool+ELM327 Wireless Vehicles Code Fault Reader VII+

Related posts

Feature

CREADER VII PLUS + FREE TPMS RESET TOOL - While this scanner will detect and correct problems in your car, it also allows you to playback the data so you can know what the anomaly is and in the process generate data that might prove helpful in the future.
MAIN FUNCTIONS - Test,read and clear codes on fours systems- Engine, Transmission, ABS and Airbag four systems,displays data stream graphic, stores and playbacks dynamic data stream for quick analysis and diagnosis;Please noted TPMS tire pressure sensor on models in & after 2012 can be read, only with some specified diagnostic tools.
EL-50448 TPMS RESET TOOL - Simple, Fast and Easy to Use; Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress Learn button while holding the tool against the tire sidewall
BROAD COVERAGE OF CAR MODELS - Suitable for most vehicles with OBDII standard after 1996,covering 30 main car models in America, Europe and Asia Pacific regionsAsian car models: Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu.USA car models: Ford, GM, Chrysler.European car models: Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Seat, Skoda, Audi, Porsche, Saab, Jagua.
CONVENIENT UPDATE VIA PC - Updating software can be downloaded from website: mycar dot x431 dot com, which is only compatible with PC with Windows XP,Windows 7, Windows 8 (32Bit), Windows 10 system (32Bit), Not compatible with IOS system; Easy to read with multilingual menu, including Chinese,English,French,Spanish.

Description

Main Functions:
1.Tests Engine, Transmission, ABS and Airbag on more than 30 main car models in America, Europe and Asia Pacific regions.
2.Suitable for most vehicles with OBDII standard after 1996
3. DTC help and service information
4. DTC Reading and Clearing Displays
5. Supports all 10 test modes of OBDII protocol
6. Test Oxygen sensor and carbon canister
7. OBDII Data Stream Graphic Display

How To USE EL-50448 TPMS Relearn Tool?
Step 1 - Enter leaning mode:
1.Set the gearshift lever to "P"
2.Put the ignition switch to "ON"
3.Enter the interface of tire pressure display by DIC
4.DIC shows "Press Set / Ctrl to re-learn"
5.Press "Set / Ctrl"
6.The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode
Step 2 - Read tire pressure sensor information
1.Start from the front-left wheel
2.Make the J-46079 or Diagnostic Tool EL-50448 antenna up against the valve core position & close to the rim of the tire sidewall
3.El-50448 tire pressure tool starts by the start switch
4.Successfully read the tire pressure sensor information when the horn bleeps once.
Step 3 - Same method to read other tire pressure information
1.Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.
2.Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.

Advantages: Get EL-50448 TPMS activation tool as FREE GIFT!!
1.Convenient on-board diagnosis
2.Portable design making
3.Efficient and effective for troubleshooting