Jawat Car Interior Lights, Multicolor Music Car LED Strip Lights Under Dash Lighting Kit with Wireless Remote Control and Sound Active Function (4pcs,8 Colors,48LEDs,USB Port)

Related posts

Feature

Smart USB Port & Easy to Operate:Getting power via smart USB port, easy to plug and play.It is available in all kinds of cars and controlled by a little infrared remote control.Please remove the battery cover before using the remote control.
Car Atmosphere Lights:Total 48 LED with high quality PVC rubber,flexible,UV and water resistant. Can be used in cars, trucks,SUV,vans and all decorative car lighting applications.
Sound-activated:Allow you to enjoy the fun with the color changing following your car stereo music rhythm as well as your voice.
Easy to Install:Simply peel off the double-sided 3m tape behind each strip and apply the LED strips under the seats or in the footwell area.
Package Include: 4 x SMD5050 Car LED Lights Set. Come with 365-days warranty and friendly customer service.

Description


Features:
Car inside atmosphere light/ foot light, create a charming atmosphere for you.
High quality SMD 5050 LED strip lights, waterproof, anti-collision, anti-corrosion.
Control Function:
8 Monochrome Modes: Red, Green, Blue, White, Orange, Yellow, Cyan, and Purple
4 Lighting Effect Change Modes:2 jump mode control, 2 fade mode control
4 Music Control Modes
With wireless IR control, change the color as you wish.
With 3m sticker on the back of the light strips, easy to install, no need to change the wire circuit in your car.
Great for lighting up the entire car interior, plug and play.

Specification:
Type: Remote Control LED Strip Lights
Voltage: DC 5V
Wattage: 10W
Material: High quality PVC Rubber
Light Color: RGB
LED type: 5050 SMD
LED Quantity: 4pcs 48 LEDs, 12 LED/ Light
Certification: CE/FCC
Working Temperature: -20~60
Light Bar: 22.5 x 1.4 x 0.9cm(8.85 x 0.55 x 0.36 inch)
Light Strip Wire Length: 2 x 120cm(47.24 inch) + 2 x 170cm(66.93 inch)
USB Port Wire Length: 100cm(39.3 inch)

Package Includes
4 x LED strips (12 pcs 5050 SMD LEDs every strip).
1 x Remote control.
1x Music IR Control Box
1x USB Port Cable
1x Instruction

NOTE
1.Connect the load lines and power lines,make sure all the connection correct before power switched on.
2.Insure there is no obstacle between the IR controller and the receiver when operating.
3.Please remove the battery cover before using the remote.
4.The remote should directly point to the receiver box and close to the receiver.
5.The sensor has to be put on or near the speaker.
6.Can be powered via USB port with the included USB cable; plug it into your laptop, computer, power bank, USB charger, cellphone charger, or car USB charger to enjoy a colorful life.